Duplex Development in Edmonton: Costs, Zoning, Design & Construction Guide
A comprehensive 2026 guide to duplex development in Edmonton: Zoning Bylaw 20001 RS Zone rules, Altus construction benchmarks, sound & fire separation, permits, and financing.
⚡ Quick Answer: Duplex Development in Edmonton (2026)
Duplex development in Edmonton (semi-detached or two-unit residential housing) is primarily governed by the City of Edmonton’s Zoning Bylaw 20001 under the RS (Small Scale Residential) Zone. The bylaw permits buildings up to 3 storeys (10.5 m max height) and 45% site coverage on lots with a minimum width of 7.5 m (or 4.0 m to 5.0 m per attached dwelling if subdivided into separate fee-simple titles). Vertical construction costs benchmark between $185 and $250 CAD per sq. ft. according to the Altus Group 2026 Canadian Cost Guide, with municipal utility servicing averaging $20,485 to $31,750 CAD per unit for EPCOR water, sewer, and power connections. The National Building Code – 2023 Alberta Edition mandates certified 1-hour fire separations and acoustic party walls (minimum STC 50) between units.
A duplex provides two independent homes on a single residential parcel. Some Edmonton property owners choose to live in one half while renting or selling the other to offset mortgage carrying costs. Others build both units as long-term rental income properties, or create a shared family compound for multi-generational living. Whatever your objective, successful duplex development in Edmonton hinges on three fundamental questions you must evaluate before committing capital: does the lot's municipal zoning allow it, does your architectural design comply with City of Edmonton siting rules, and does your pro-forma budget account for off-site servicing, permits, and construction costs that sit outside simple per-square-foot estimates?
This comprehensive guide covers each stage of the development journey. We cite the City of Edmonton’s Zoning Bylaw 20001, the National Building Code – 2023 Alberta Edition, and third-party construction indices from the Altus Group 2026 Canadian Cost Guide. Where a cost or regulatory threshold depends directly on your parcel dimensions or architectural specification, we explain the variable instead of guessing.
As an experienced Edmonton custom home and multi-family builder, Evergreen Dream Home partners with homeowners, investors, and infill developers across Edmonton, Strathcona County, St. Albert, and Sherwood Park to deliver high-performance, profitable residential projects.
Figure 1: High-end contemporary semi-detached duplex in an established Edmonton mature neighbourhood, featuring separate street-facing entrances, natural cedar accents, and energy-efficient triple-pane glazing.
What Is Duplex Development in Edmonton?
In municipal planning terms, duplex development in Edmonton is the planning, entitlement, approval, and construction of a residential structure containing two dwelling units on a single parcel of land. In everyday conversation, "duplex" is often used interchangeably with "semi-detached home" (two homes built side-by-side sharing a common vertical party wall) or a "stacked duplex" (one unit located entirely or partially above another).
The City of Edmonton's unified residential building permit application groups these configurations under "Semi-detached / Duplex (2 units)". Furthermore, Part 8 of Zoning Bylaw 20001 provides precise legal definitions for attached housing forms. When developing your project, three primary ownership and operational strategies typically emerge:
- Owner-Occupied with Rental Income ("House Hacking"): The homeowner resides in one unit while leasing the second unit to a long-term tenant. The rental income offsets mortgage debt, property taxes, and utility expenses.
- Multi-Generational Living: Two related households live side-by-side with complete privacy, autonomous entrances, dedicated kitchens, and separate laundry facilities while remaining next door.
- Turnkey Investment (Build to Rent or Sell): Real estate investors acquire an older infill bungalow, demolish the structure, and build two modern units to retain as high-cash-flow rental assets or subdivide into separate fee-simple titles for individual retail sale.
While duplexes provide compelling financial and lifestyle benefits, financial returns are never automatic. They depend heavily on raw land acquisition pricing, site servicing complexities, prevailing interest rates, and municipal design compliance.
Zoning for Duplex Development in Edmonton: Which Zones Allow It?
Zoning dictates exactly what physical form can be constructed on any Edmonton parcel. Under Edmonton’s modernized Zoning Bylaw 20001 (which took effect on January 1, 2024), residential zoning was fundamentally streamlined to encourage gentle density. Homeowners and developers should reference the City’s interactive zoning map to identify which zone applies to their lot:
1. RS (Small Scale Residential Zone)
The RS Zone is the primary residential zone governing mature and established Edmonton neighbourhoods located inside the Anthony Henday ring road (such as Ritchie, Glenora, Westmount, Strathcona, Bonnie Doon, and Crestwood). The RS Zone allows a wide range of small-scale residential developments up to 3 storeys, including single detached, semi-detached, duplex, and multi-unit housing. For duplex development in Edmonton's central and mature communities, the RS Zone is the designation you will encounter most frequently.
2. RSF (Small Scale Flex Residential Zone)
The RSF Zone is predominantly applied in developing suburban greenfield neighbourhoods and large master-planned communities outside the core. It allows similar housing forms but offers greater flexibility in site and building envelope rules, permitting a maximum building height of 12.0 metres and site coverage up to 55 per cent.
3. RSM and RM (Medium Scale Residential Zones)
The RSM and RM zones are specifically planned for larger-scale row housing, multi-unit townhouses, and mid-rise apartment buildings. Under Bylaw 20001, single detached, semi-detached, and duplex housing are generally only permitted in these zones if they existed prior to January 1, 2024, or if they are integrated on the same parcel as a larger multi-unit development. A standalone new duplex is generally not the intended form for medium-scale zones.
Builder Tip: Always verify your parcel's zoning on the municipal map before drafting blueprints or removing conditions on a purchase agreement. A lot that physically looks large enough for a duplex may have site-specific restrictive covenants or statutory plan overlays that restrict development.
RS Zone Rules That Shape an Edmonton Duplex
When designing a duplex within the standard RS Zone, your architectural plans must satisfy every dimensional, height, and setback requirement stipulated in Section 2.10 of Zoning Bylaw 20001. A proposal cannot violate any single parameter, even if it easily complies with all others.
| Bylaw 20001 Metric (RS Zone) | Municipal Requirement | Architectural Impact on Duplex Design |
|---|---|---|
| Maximum Dwellings on Interior Site | 8 dwellings | Easily accommodates a duplex (2 principal dwellings), plus potential secondary basement suites. |
| Minimum Site Area per Dwelling | 75.0 m² (approx. 807 sq. ft.) | A standard 50-ft infill lot (approx. 550–650 m²) easily exceeds the site area requirement for 2 to 4 units. |
| Minimum Site Depth | 30.0 m (approx. 98.4 ft.) | Protects outdoor amenity space and rear yard separation. |
| Minimum Site Width (Single Lot) | 7.5 m (approx. 24.6 ft.) | Enables narrow-lot semi-detached configurations. |
| Minimum Lot Width (Subdivided Lots) | 5.0 m (without lane); 4.0 m (with rear lane) | Crucial rule for fee-simple subdivision: a typical 50-ft lot (15.24 m) splits into two 7.62 m lots, far exceeding the 4.0 m alley threshold. |
| Maximum Building Height | 10.5 m (approx. 34.4 ft.) | Permits full two-storey or three-storey contemporary massing with flat, shed, or pitched rooflines. |
| Maximum Site Coverage | 45 per cent | Combined footprint of principal building and attached accessory structures cannot exceed 45% of total lot area. |
| Maximum Building Length | 30.0 m (approx. 98.4 ft.) | Governs front-to-back duplex configurations on deep parcels. |
| Minimum Front Setback | 4.5 m (approx. 14.8 ft.) | Aligns the front facade with neighbourhood streetscape patterns. |
| Minimum Rear Setback | 10.0 m (approx. 32.8 ft.) | Ensures adequate private outdoor amenity space and rear yard depth. |
| Minimum Interior Side Setback | 1.2 m (approx. 3.9 ft.) | Standard property line buffer between adjacent neighbours. |
| Minimum Flanking Side Setback (Corner) | 1.2 m (2.0 m where main entrance faces flanking street) | Requires extra clearance if an entrance door faces the avenue on a corner parcel. |
Figure 2: Meticulous architectural planning and lot subdivision modeling in Edmonton, ensuring full compliance with RS Zone setbacks, building envelope coverage, and servicing corridors.
Subdividing into Separate Fee-Simple Titles
If your business model involves selling each side of the duplex to a separate homebuyer, you must complete a legal subdivision application through the City of Edmonton’s Subdivision Authority. Because Zoning Bylaw 20001 allows attached dwellings on separate lots with widths as narrow as 4.0 metres (when abutting an alley), an existing 50-foot-wide (15.24 m) mature parcel can readily be split down the demising party wall into two independent 25-foot (7.62 m) titles. Each unit will possess its own separate legal title, municipal address, and tax assessment, avoiding costly condominium corporation management.
Design Rules That Shape Duplex Architecture in Edmonton
Beyond dimensional envelopes, Zoning Bylaw 20001 establishes specific urban design requirements to ensure new duplex developments enhance established streetscapes:
- Façade Articulation: Where an exterior building wall faces a public roadway, or exceeds 20.0 metres in length facing an interior side property line, the façade must incorporate at least two architectural design techniques. Acceptable techniques include roofline variations, projected or recessed wall planes, cantilevered balconies, covered porches, and contrasting exterior cladding materials (such as natural cedar, acrylic stucco, and architectural metal panels).
- No Identical Neighbours: To prevent visual monotony, identical or mirrored front façades are prohibited on immediately abutting parcels. However, this restriction does not apply to attached dwellings within the same building—the two halves of your duplex can feature matching or symmetrical architecture.
- Prominent Street-Facing Entrances: Each ground-oriented dwelling adjacent to a front or flanking property line must feature a clearly identifiable principal entrance door, covered porch, or entry landing facing the street. Sliding patio doors cannot serve as a principal entrance. In addition, no more than two entrances are permitted along an interior side lot line.
- Rear Alley Vehicle Access: Where a parcel abuts a developed rear lane, vehicular access must be taken exclusively from the alley. Rear attached garages are strictly prohibited in the RS Zone. If a detached garage is built in the rear yard, it must be separated by at least 3.0 metres from the principal residence.
- Open Option Parking: Under Edmonton’s groundbreaking Open Option Parking policy (enacted city-wide in 2020), the City does not mandate a minimum number of off-street parking stalls. The builder or owner determines the appropriate amount of parking based on market demand and tenant requirements.
Building Code, Fire Separation & Acoustic Soundproofing
Constructing a duplex is far more intricate than building a single-family house because two families live adjacent to each other. In Alberta, all new residential construction must conform to the National Building Code – 2023 Alberta Edition (effective May 1, 2024), which imposes rigorous life safety and sound transmission standards along the central dividing assembly.
Figure 3: Active framing of an Edmonton duplex demising party wall, featuring double-stud assemblies, mineral wool sound insulation, and resilient channel decoupling compliant with the National Building Code – 2023 Alberta Edition.
Key Technical Requirements for Party Walls:
- 1-Hour Fire-Resistance Rating: The common dividing wall must provide a continuous fire-resistance rating of not less than 45 minutes to 1 hour, extending from the top of the foundation footing all the way to the underside of the roof deck. Penetrations by plumbing pipes or electrical conduits must be sealed with certified firestop caulking.
- Acoustic Sound Transmission Class (STC Rating): Soundproofing is paramount for homeowner privacy and resale value. The Alberta Building Code mandates a minimum Sound Transmission Class (STC) rating of 50 between dwelling units (with STC 55+ recommended for luxury builds). Evergreen Dream Home achieves this through an engineered double-stud wall system separated by a 1-inch air gap, filled with dense mineral wool acoustic batt insulation (e.g., Roxul Safe'n'Sound), and decoupled using resilient metal sound channels with double-layer Type X drywall.
- Independent Mechanical & Electrical Services: To facilitate separate utility billing or future fee-simple title sales, each unit must be equipped with its own dedicated mechanical systems: dual high-efficiency furnaces or cold-climate heat pumps, independent HRV (Heat Recovery Ventilator) units, separate 100A or 200A electrical distribution panels, and separate EPCOR electrical and gas meters.
- Shared Structural Considerations: The concrete foundation footing and frost walls must be poured to support both living units uniformly, engineered to resist differential settling across Edmonton’s expansive clay soils.
What Affects the Cost of Duplex Development in Edmonton?
Because duplex development involves constructing two fully functional residential units within a single structure, total project capital is higher than building a single-family dwelling—though cost per square foot is frequently more economical due to shared excavation, roofing, and common party walls.
According to the Altus Group 2026 Canadian Cost Guide, baseline hard construction costs in Edmonton benchmark as follows:
| Altus 2026 Category (Edmonton, Alberta) | Hard Construction Cost Range (CAD) | Application to Edmonton Duplex Builds |
|---|---|---|
| Row Townhouse (Unfinished Basement) | $185 to $250 / sq. ft. | Closest published benchmark for attached residential infill construction with standard builder finishes. |
| Single-Family Residential (Unfinished Basement) | $175 to $275 / sq. ft. | Standard detached production baseline across greater Edmonton. |
| Townhouse Civil Servicing Benchmark | $20,485 to $31,750 / unit | Municipal water, sanitary sewer, storm, and power connection costs per dwelling. |
Important Note on Altus Data: Altus explicitly notes that its unit rates cover vertical hard construction costs only. They strictly exclude raw land acquisition, demolition of existing structures, hazardous material abatement, EPCOR utility line replacements, municipal development permit fees, engineering and architecture, mortgage interest, builder warranty, GST, and contingency reserves.
Realistic 2026 Turnkey Pro-Forma: Edmonton Side-by-Side Duplex Build
To provide homeowners and investors with an actionable budgeting framework, the table below outlines a typical full turnkey budget for a side-by-side duplex (two 1,800 sq. ft. two-storey units, total 3,600 sq. ft. above grade) on a 50-foot mature infill parcel in Edmonton:
| Budget Component | Estimated Cost Range (CAD) | Scope & Details |
|---|---|---|
| Land Acquisition (50-ft Infill Lot) | $320,000 – $480,000 | Older bungalow parcel in mature Edmonton neighbourhood (Ritchie, King Edward Park, Bonnie Doon). |
| Demolition & Environmental Abatement | $22,000 – $38,000 | Permits, asbestos abatement, mechanical disconnection, structure removal, and clean foundation backfill. |
| Architecture, Engineering & Legal Surveys | $25,000 – $40,000 | Complete architectural working drawings, structural engineering, HVAC design, real property reports, and subdivision plan. |
| EPCOR Utility Servicing Upgrades | $42,000 – $65,000 | Water and sanitary services upsized and split into two separate connections ($21k–$32k/unit as per Altus). |
| Municipal Permits & Tree Bonds | $12,000 – $22,000 | Development permits, building safety code fees, OSCAM right-of-way permits, and Public Tree Protection security deposits. |
| Hard Vertical Construction (3,600 sq. ft.) | $666,000 – $900,000 | Framing, roofing, triple-pane windows, HVAC, electrical, plumbing, insulation, drywall, and modern turnkey finishes ($185–$250/sq. ft.). |
| Detached Double Garage & Landscaping | $45,000 – $75,000 | Double detached garage (or dual single stalls), concrete sidewalks, final grading, sod, and privacy fencing. |
| Financing Carrying Costs & Insurance | $30,000 – $55,000 | Construction mortgage draw interest, course-of-construction insurance, and municipal taxes during build. |
| Alberta New Home Warranty & Contingency | $35,000 – $60,000 | Mandatory 1-2-5-10 warranty registration plus 5–8% unforeseen contingency cushion. |
| TOTAL ESTIMATED TURNKEY BUDGET | $1,197,000 – $1,735,000 | Turnkey cost represents approximately $598,500 to $867,500 per completed fee-simple unit. |
Basement Suite Optional Upside: Adding two fully finished legal secondary suites in the basements (approx. 700 sq. ft. each) typically adds $45,000 to $70,000 per suite, converting the development into a 4-unit income-generating powerhouse that dramatically increases rental yields.
Figure 4: Sunlit open-concept living space in an Edmonton duplex build, featuring wide-plank oak flooring, 9-foot ceilings, and high-performance custom cabinetry that maximizes appraisal and rental value.
Permits and Approvals for Duplex Development in Edmonton
Securing municipal approvals for an Edmonton duplex involves navigating both development zoning review and safety code compliance. Submitting complete, professionally coordinated documentation accelerates issuance through the City’s digital portals:
- Development Permit: The City reviews your architectural plans against Zoning Bylaw 20001 rules (height, site coverage, setbacks, parking, and façade design). Applications are submitted online through the City's SelfServe portal. Eligible designs that comply strictly with all standard RS regulations can qualify for the City's Auto-Review program, which can issue development permits in as little as 1 to 5 business days.
- Building Permit: The City’s safety codes officers review structural engineering, floor joist spans, energy modeling (Section 9.36), and fire-separation assemblies against the Alberta Building Code. Builders also have the option to apply for a Footing and Foundation Only Permit to begin excavation while full architectural plan review concludes.
- Builder Licensing & Alberta Warranty: Under Alberta's New Home Buyer Protection Act, every residential home builder must hold an active Government of Alberta Builder Licence and register mandatory 1-2-5-10 warranty coverage before the City can legally issue a building permit.
- Infill Site Permits: When redeveloping an existing mature parcel, your builder must coordinate supplementary city approvals:
- Public Tree Permits: Required to erect physical protective barrier hoarding around city-owned boulevard elm or ash trees.
- OSCAM Permits (On-Street Construction and Maintenance): Mandatory for crane placements, concrete pump staging, and sidewalk or lane closures.
- Construction Implementation Plan (CIP): Outlines site fencing, trade parking, waste containment, and neighbour communication.
- Good Neighbour Notices: Courtesy notification letters mailed to abutting property owners prior to demolition.
The Duplex Construction Process: Step-by-Step
Developing an Edmonton duplex spans approximately 8 to 14 months from initial site feasibility to final occupancy:
- Stage 1: Lot Acquisition & Feasibility: Review parcel boundaries, zoning, EPCOR utility service locations, title encumbrances, and tree preservation constraints.
- Stage 2: Architectural & Engineering Design: Draft custom floor plans satisfying RS Zone massing, street-facing entrances, and acoustic party wall details.
- Stage 3: Financing & Pro-Forma Approval: Finalize construction financing or draw mortgage terms with an Alberta financial institution.
- Stage 4: Permit Submission & Abatement: Submit development and building permits via SelfServe. Complete environmental hazardous materials testing, asbestos removal, and controlled mechanical demolition.
- Stage 5: Foundation & Civil Servicing: Excavate site, install deep underground EPCOR water/sewer tie-ins, pour reinforced concrete footings and frost walls, and install weeping tile with damp-proofing.
- Stage 6: Framing & Lock-Up: Erect engineered wood timber framing, build the double-stud acoustic fire separation wall, install roof trusses, weather-resistant house wrap, and triple-pane architectural windows.
- Stage 7: Rough-Ins & Insulation: Install separate dual HVAC systems, plumbing stacks, electrical panels, spray foam/batt insulation, resilient channels, and double-layer Type X drywall.
- Stage 8: Interior Finishes & Occupancy Walkthrough: Install custom millwork, quartz countertops, tile, flooring, fixtures, paint, and final mechanical trim. Pass City safety codes inspections, register Alberta new home warranty, and secure occupancy certificates.
Alberta Winter Construction Note: Edmonton’s seasonal climate requires specialized winter construction practices. When pouring foundations or laying masonry between November and March, experienced builders employ hydronic ground-thawing equipment, insulated curing blankets, concrete cold-weather accelerators, and temporary propane heating to maintain envelope integrity.
Financing and Ownership Strategies for Your Duplex
The financing structure for an Edmonton duplex depends on whether the property will be owner-occupied or developed as an investment:
- Owner-Occupied Residential Financing: When residing in one half, Canadian chartered banks and credit unions (such as ATB Financial, Servus Credit Union, RBC, and TD) offer competitive residential mortgage rates. Many lenders permit borrowers to utilize 50% to 100% of the projected fair-market rental income from the second unit to help qualify for a higher loan amount.
- Commercial & Progress Draw Construction Loans: Speculative builders and investors utilize construction progress draw mortgages. Lenders disburse capital in milestone tranches (e.g., foundation complete, lock-up, drywall, and substantial completion) following independent quantity surveyor inspections.
- Subdivision & Separate Fee-Simple Titles: Creating two fee-simple titles allows each half to be financed, refinanced, or sold independently. This eliminates joint financial liability and appeals to individual retail buyers seeking modern infill housing without condominium fees.
- CMHC MLI Select Considerations: Canada Mortgage and Housing Corporation’s (CMHC) popular MLI Select program offers up to 50-year amortizations and 95% loan-to-cost financing for multi-unit residential projects. However, MLI Select requires a minimum of five residential dwelling units. A standard two-unit duplex does not qualify on its own—unless you add secondary basement suites and develop a fourplex or fiveplex configuration.
How to Choose the Right Builder for Duplex Development in Edmonton
A duplex is a complex multi-family asset that requires deep familiarity with urban infill logistics and Alberta building codes. When evaluating prospective builders, ask these essential questions:
- Builder Licensing: Are you actively registered on the Government of Alberta Residential Builder Registry?
- Warranty Provider: Which accredited warranty provider backs your builds (e.g., Alberta New Home Warranty Program, Travelers, or Progressive Home Warranty)?
- Proven Infill Portfolio: Can you provide addresses and references for duplexes or semi-detached infill homes you have completed in mature Edmonton communities?
- Acoustic & Fire Separation Expertise: What specific assembly and materials do you use to ensure party walls exceed the Alberta Building Code’s STC 50 sound rating?
- Transparent Costing: Does your fixed-price or cost-plus contract itemize off-site EPCOR servicing, demolition, tree bonds, and utility tie-ins, or are those excluded?
Frequently Asked Questions About Duplex Development in Edmonton
Is a duplex the same as a semi-detached home in Edmonton?
In everyday language, both terms describe two private residences in one building. In the City of Edmonton’s unified permit application, both are classified under "Semi-detached / Duplex (2 units)". Technically, under Zoning Bylaw 20001, semi-detached refers to two homes joined side-by-side sharing a common vertical party wall, whereas a duplex can also refer to one dwelling situated above another (stacked configuration).
Where can I build a duplex in Edmonton?
Duplexes are permitted in Edmonton's RS (Small Scale Residential) Zone, which covers the vast majority of established neighbourhoods inside the Anthony Henday ring road (such as Ritchie, Glenora, Crestwood, Strathcona, and Westmount). They are also permitted in the RSF (Small Scale Flex) Zone. However, in higher-density RSM and RM zones, new standalone duplexes are generally not permitted unless integrated with larger multi-unit housing.
Can I subdivide and sell each side of an Edmonton duplex separately?
Yes. Zoning Bylaw 20001 allows attached dwellings on separate parcels with lot widths as narrow as 4.0 metres when abutting an alley (or 5.0 metres without an alley). A typical 50-foot-wide (15.24 m) lot can be subdivided into two 25-foot (7.62 m) fee-simple titles through the City’s Subdivision Authority, allowing each unit to be bought, sold, and mortgaged independently without condo fees.
Do I need to provide on-site vehicle parking for a duplex in Edmonton?
No mandatory vehicle parking is required. Under Edmonton’s Open Option Parking policy, property owners and builders decide how many parking stalls to provide based on client demand. However, if vehicle access is provided, it must come from the rear lane if an alley exists, and rear attached garages are not permitted in the RS Zone.
Does a duplex require Alberta New Home Warranty coverage?
Yes. Under the Alberta New Home Buyer Protection Act, all newly constructed duplexes and semi-detached homes must carry mandatory warranty coverage provided by an accredited warranty corporation: 1 year on labour and materials, 2 years on delivery and distribution systems (HVAC, plumbing, electrical), 5 years on the building envelope (extendable to 7 years), and 10 years on major structural components.
Can I add secondary basement suites to each side of an Edmonton duplex?
Yes. Under Zoning Bylaw 20001, secondary suites are permitted within attached dwellings in the RS Zone, subject to meeting Alberta Building Code requirements (such as independent heating systems, private exterior entrances, and fire-rated separations). Adding two legal basement suites effectively transforms a duplex into a four-dwelling property, maximizing cash flow.
Does Evergreen Dream Home build duplexes and multi-family infill projects?
Yes. Evergreen Dream Home is an experienced Edmonton builder specializing in custom luxury single-family homes, front-to-back duplexes, side-by-side semi-detached residences, triplexes, and fourplexes. We provide turnkey services from lot feasibility, architectural design, and municipal permits to construction, party wall engineering, and final warranty registration across Edmonton, Strathcona County, St. Albert, and Sherwood Park.
Ready to Plan Your Edmonton Duplex Development?
Whether you are planning to build a custom multi-generational family duplex, house-hack your personal residence, or execute a high-yield infill development, partnering with a knowledgeable builder is the foundation of your success.
For more insights into municipal requirements and budgeting, explore our related guides:
- Complete Guide to Infill Development in Edmonton
- How Much Does It Cost to Build an Infill Home in Edmonton? (2026)
- How Much Does It Cost to Build a Custom Home in Edmonton?
- Custom Home Building in Edmonton: A Complete Guide
Ready to evaluate your lot's potential? Contact Evergreen Dream Home today or call (780) 667-8067 to schedule your personalized duplex feasibility consultation.
